NFI Master Hearth Professional on June 5, 2013 Answer Mike from New York, NY asked: May 31, win makeup vouchers 2013 How do you secure this stove masonry adaptor (6 to a sa integrated holiday vouchers 8" square clay pipe?
Single-walled nails inc promotional code stovepipe requires 18" of clearance to combustibles and could not be used in this application.
Any suggestions other than securing single wall pipe with screws?Mike from MI asked: December 8, 2015, whats the difference in using this Selkirk DSP double-wall black stovepipe masonry adaptor vs a wall thimble?Please view this reducer here.Last thing, I know one would not use insulation with the 'kraft' paper cover, can you use just large chunks of un-papered insulation, around this adapter, to fully insulate this cavity in the wall?What can I use to get through the wall?Would it meet code standards to use this double wall stovepipe through the square thimble.To install, the adapter would be placed partly into the hole prepared in the clay pipe (leaving room to work behind the collar).Would this product fit through my thimble?The builder must of used the same clay liner for the chimney and used a leftover piece for the thimble in the 1960's.NFI Master Hearth Professional on September 19, 2013 Answer Allen from VA asked: July 9, 2013 I have a New Englander wood burning stove with a 6" top flue collar.
Unfaced fiberglass insulation can be used around the adapter as it passed into the chimney.
The back panel is badly cracked and has a dime size hole, so I am not using it right now.
I assume the outside diameter is less than 6-3/4"?However, the ample clearance that you will have to combustibles could theoretically make the installation possible.If you would like to use the double wall connector, the thimble would need to be be broken up and removed.1 Answer This adapter can indeed be connected to 22-26 gauge single wall pipe, although the air space between the inner and outer walls on the adapter will be exposed.The broken thimble is 6 inches x 18 inches.1 Answer Per the manufacturer, the DSP line must be assembled with the male end up on the outer pipe wall.